Envelope FitBack to the envelope calculator

A free guide for your paper drawer

Fold A4 for a C5 envelope.

One sheet, one fold, and a check against the envelope you actually have. No trimming or template required.

Start with A4
210 × 297 mm
After one half fold
210 × 148.5 mm
C5 nominal outside
229 × 162 mm

Check the inside, not just the label. C5’s 162 × 229 mm is its nominal outside size. Seams, the opening, paper thickness, and a bulky crease reduce usable room. A size comparison is a starting point; the last step is a gentle test in your own envelope.

You’ll need

  • One A4 sheet, 210 × 297 mm
  • One empty C5 envelope
  • A ruler marked in millimetres
  • A clean, flat surface

Before folding

Check that your paper really is A4. US Letter is a different size. Keep the envelope open and unsealed. Begin with one ordinary sheet; extra sheets, cards, or inserts need a separate fit test.

All diagrams are original illustrations and are not actual-size patterns. Measure your paper and envelope, not the drawings.

Step 1 · Start upright

Put the short edges at the top and bottom.

Lay the A4 sheet in portrait orientation: 210 mm across and 297 mm from top to bottom. If you want the writing inside the fold, put that side face up.

You will bring the bottom short edge to the top short edge. The crease will run across the middle of the long dimension.

An upright A4 sheet, 210 millimetres wide and 297 millimetres tallThe short sides are horizontal at the top and bottom. The long sides run vertically.210 mm297 mmA4writing face upbottom short edge
Portrait orientation. No cutting, resizing, or printed template.
Step 2 · Make one fold

Match the bottom edge to the top edge.

Lift the bottom half upward. Align both top corners and the two short edges. Hold them together while you settle the fold.

Pinch the middle of the new fold, then smooth out toward each end. Keep the edges aligned as you crease. You now have two layers.

The crease is halfway along 297 mm: 297 ÷ 2 = 148.5 mm.

Fold the bottom short edge upward to meet the top short edgeA dashed horizontal line crosses the sheet halfway down its 297 millimetre length, 148.5 millimetres from either short edge. A curved arrow points from the bottom edge toward the top edge.edges meet herehalfwaybottom edge moves up148.5 mm
Dashed line: the new crease. Curved arrow: move the lower half upward, keeping the short edges together.
Step 3 · Check the folded sheet

It should be 210 × 148.5 mm.

Keep the folded sheet landscape, with the matched open edges at the top and the crease at the bottom. Measure across and down without squeezing or stretching the paper.

A half-folded A4 sheet is 148.5 × 210 mm when turned upright. The named A5 size is 148 × 210 mm; that half-millimetre difference is real. Do not trim it away for this guide.

The folded landscape rectangle is 210 millimetres wide and 148.5 millimetres tallTwo short edges meet at the top. A solid crease runs along the bottom. The rectangle has the same 210 millimetre width as the original A4 sheet and half its original height.210 mm148.5 mmmatched open edgescrease
The folded outline is 210 mm wide and 148.5 mm high, before allowing for the bulge of a real crease.
Step 4 · Test the real envelope

Check the seams, then slide it in gently.

With the flap open, measure the usable space between the inner seams, across and from the opening to the inside bottom. Use the narrowest unobstructed area; the opening must also admit the sheet.

Put the folded sheet’s 210 mm side across the envelope’s longer side. Slide it in without forcing or bending the corners. Check that the flap can close naturally. If it catches, the envelope feels stretched, or the flap will not close, stop and try a roomier envelope.

A planning example, not a measured claim: an inside space of 225 × 158 mm leaves 15 mm across and 9.5 mm vertically around a 210 × 148.5 mm outline. If centred, that is 7.5 mm at each side and 4.75 mm top and bottom. Crease bulk still needs a real test.

Measure a C5 envelope inside its seams with the flap openAn open flap sits above the envelope body. Dashed arrows mark usable inside width between the side seams and usable inside height from the opening to the bottom seam. No exact inside size is assumed.usable inside widthusable inside heightflap openmeasure the real seams
C5’s outside proportions are shown. The inner seams are illustrative, not a promise of usable dimensions.

A comfortable fit? Keep the size.

Once one sheet goes in and the flap closes comfortably, you have checked that particular paper and envelope. Test again before folding a batch or adding sheets, cards, or other inserts.

For a different envelope, enter its measured inside dimensions in Envelope Fit. You can compare folds and save that size in your own browser for next time.

Dimensions & sources

Guide dated November 19, 2026. Text and diagrams created for Envelope Fit; no photographs or diagrams copied from other sites.